Polyester Resin Allnex 4627 BEMT/56 + Hardener
Item Number: A-10050-V
This product is subject to the Chemicals Prohibition Ordinance.
Shipping only after verification.
Verification of delivery conditions - click here before purchasing!
Material Characteristics
Polyester resin (UP resin) based on orthophthalic acid
Accelerated, thixotropic, increased storage stability
Reduced styrene emissions
Reactivity: medium
Heat deflection temperature (HDT): 65 °C
according to DIN EN ISO 75‑2
Curing: 16 h at 70 °C
Edge fiber stress: 1.80 MPa (edgewise)
Glass transition temperature (Tg): 86 °C
according to DIN EN 61006
DMA, heating rate 2 K/min
Processing time (gel time): 11–21 min at 20 °C
with 2 % MEKP hardener added
Curing: low-stress, tack-free
- Color: blue / Color change: brown
Meets the specifications of Lloyd’s Register of Shipping
Special Features
Suitable for thick-walled laminates, including wet-on-wet
Very good mechanical properties, high impact strength
Universally applicable in the GRP sector
Suitable for hand lay-up and fiber spraying processes (laminating resin)
Typical Applications
Automotive body construction
Boat building
Molded parts of all kinds
General FRP laminating work
Application
Curing takes place at room temperature with the addition of a ketone peroxide (e.g., MEKP hardener DD-MP1).
Stir the polyester resin thoroughly before use to ensure a homogeneous distribution of the thixotropic agents and additives.
Processing temperature: 18°C and above
Hardener addition: 1–2 % MEKP
The pot life (gel time) is 11–21 min at 20 °C
Technical Data Sheet
Processing Instructions
Safety Data Sheet
5
4
3
2
1
Loading reviews...
Delete review
Information on the Authenticity of Customer Reviews
Only registered customers can submit a review, and only after purchasing the product. All visible reviews meet this requirement.
Label Elements
Allnex 4627 BEMT/56

MEKP-Hardener
Allnex 4627 BEMT/56
Hazard Statements
H226 - The liquid and vapor are flammable. H361d - May cause harm to the unborn child. H372 - Causes damage to organs through prolonged or repeated exposure. H335 - May cause respiratory irritation. H315 - Causes skin irritation. H319 - Causes serious eye irritation. H317 - May cause an allergic skin reaction. H412 - Harmful to aquatic life with long-lasting effects.
Precautionary statements
P210 - Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P240 - Ground the container and the equipment to be filled. P241 - Use explosion-proof electrical equipment, ventilation systems, and lighting. P242 - Use only non-sparking tools. P243 - Take measures against electrostatic discharges. P280 - Wear protective gloves, protective clothing, eye protection, and face protection. P201 - Obtain special instructions before use. P260 - Do not breathe dust, fumes, gas, mist, vapor, or aerosol. P264 - After use, wash face, hands, and all exposed skin thoroughly. P270 - Do not eat, drink, or smoke while using this product. P271 - Use only outdoors or in well-ventilated areas. P272 - Do not wear contaminated work clothing outside the workplace. P273 - Avoid release into the environment. P303 + P361 + P353 - IF ON SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower]. P370 + P378 - In case of fire: Use carbon dioxide, dry chemical, or foam extinguishers to extinguish the fire. P308 + P313 - IF exposed or affected: Seek medical advice/attention. P304 + P340 - IF INHALED: Move the person to fresh air and ensure unobstructed breathing. P312 - If you feel unwell, call a POISON CONTROL CENTER or a doctor. P321 - Specific treatment (see additional first aid information on this label). P362 + P364 - Remove contaminated clothing and wash before wearing again. P305 + P351 + P338 - IF IN EYES: Gently rinse with water for several minutes. Remove any contact lenses, if possible. Continue rinsing. P337 + P313 - If eye irritation persists: Get medical advice/attention. P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention. P403 + P235 - Store in a well-ventilated place. Keep cool. P405 - Keep locked up. P403 + P233 - Store in a well-ventilated place. Keep container tightly closed. P501 - Dispose of contents/container in accordance with local and national regulations.
MEKP Hardener
Hazard Statements
H242 Heating may cause a fire. H302+H332 Harmful if swallowed or inhaled. H314 Causes severe skin burns and serious eye damage.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P234 Store only in original packaging. P280 Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection. P303+P361+P353 IF ON SKIN (or hair): Remove all contaminated clothing immediately. Rinse skin with water. P305+P351+P338+P3l0 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. Immediately call a POISON CONTROL CENTER or a doctor. P370+P378 In case of fire: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide to extinguish.
Allnex
Germany





