DD Composite GmbH
Epoxy Resin 200G + Hardener 15L
Item number 97003-15-V
EUR 17.90
*
Ready for shipping, delivery in 48h
Content
0,65 kilogram
Unit price
EUR 27.53 / kilogram
* Incl. VAT excl. Shipping
The epoxy resin “Epox200G + Hardener 15L” is a system for hand laminating for vacuum infusion, fiber winding, and other processes.
For technological reasons, DNV-GL approval for the construction of boats and wind turbines will not be renewed.
However, the product will remain unchanged in our range.
Properties:
- Very low viscosity
- Free from alkylphenols and benzyl alcohol
- The resin component is based on bisphenol A/F and is therefore completely resistant to crystallization
- Free from solvents and fillers
- High static and dynamic strength
You will achieve the best results if the system/component is tempered for 1 hour at 23°C, followed by 5 hours at 70°C and 5 hours at 80°C.
Application:
- Vacuum infusion (RI), vacuum pressing, wet pressing, RTM (resin transfer molding), fiber winding, hand laminating
Processing:
- Mixing ratio 100 parts / 30 parts (100 parts resin / 30 parts hardener) by weight!
- The pot life can be adjusted as desired by mixing the two hardener variants 15L and 120L. Further data can be found in the technical data sheet.
- Curing is possible from 10°C, but we recommend warm curing at 40°C for at least 12 hours.
- The processing time is approx. 30 min.
Daniel Dietrich
Zu den Bürgerhufen 6
04924 Bad Liebenwerda OT Lausitz
Germany
gpsr@phd-24.de
+493534147098
DD Composite GmbH
DD Composite GmbH
Zu den Bürgerhufen 6
04924 Bad Liebenwerda OT Lausitz
Germany
info@phd-24.de
https://www.phd-24.de/
03534147098
03534147099
