Epoxy Resin 200G + Hardener 15L


Item Number: 97001-15-V

EUR 5.90 *
Content 0,13 kilogram
Unit price €45.40 / kilogram
Ready for shipping, delivery in 48h



* Incl. VAT excl. Shipping


The epoxy resin “Epox200G + Hardener 15L” is a system for hand laminating for vacuum infusion, fiber winding, and other processes.

For technological reasons, DNV-GL approval for the construction of boats and wind turbines will not be renewed.
However, the product will remain unchanged in our range.

Properties:

  • Very low viscosity
  • Free from alkylphenols and benzyl alcohol
  • The resin component is based on bisphenol A/F and is therefore completely resistant to crystallization
  • Free from solvents and fillers
  • High static and dynamic strength

You will achieve the best results if the system/component is tempered for 1 hour at 23°C, followed by 5 hours at 70°C and 5 hours at 80°C.

Application:

  • Vacuum infusion (RI), vacuum pressing, wet pressing, RTM (resin transfer molding), fiber winding, hand laminating

Processing:

  • Mixing ratio 100 parts / 30 parts (100 parts resin / 30 parts hardener) by weight!
  • The pot life can be adjusted as desired by mixing the two hardener variants 15L and 120L. Further data can be found in the technical data sheet.
  • Curing is possible from 10°C, but we recommend warm curing at 40°C for at least 12 hours.
  • The processing time is approx. 30 min.
Technical Data Sheet

Epoxy Resin 200G + Hardener 15L


Processing Instructions

Working with Epoxy Resin



Safety Data Sheet

 

Epoxy Resin 200G

Hardener 15L

 



Information on the Authenticity of Customer Reviews
Only registered customers can submit a review, and only after purchasing the product. All visible reviews meet this requirement.

Label Elements


Epoxiy Resin 200G
Gefahrstoff Icon - GSH07 Gefahrstoff Icon - GSH09
Hardener 15L
Gefahrstoff Icon - GSH05 Gefahrstoff Icon - GSH07 Gefahrstoff Icon - GSH08
Epoxy Resin 200G
Hazard statements
H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause allergic skin reactions. H411 Toxic to aquatic life with long-lasting effects. EUH205 Contains epoxy compounds. May cause allergic reactions.
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P273 Avoid release to the environment. P280 Wear protective gloves/eye protection/face protection. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Hardener 15L 
Hazard statements
H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H317 May cause allergic skin reactions. H361d Suspected of damaging the unborn child. H412 Harmful to aquatic life with long-lasting effects.
Precautionary statements
P260 Do not breathe dust or mist. P303+P361+P353 If on skin (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a poison control center or doctor/physician. P321 Specific treatment (see on this label). P362+P364 Take off contaminated clothing and wash before reuse. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

DD Composite GmbH
Daniel Dietrich
Zu den Bürgerhufen 6
04924 Bad Liebenwerda OT Lausitz
Germany
gpsr@phd-24.de
+493534147098

More

MORE INTERESTING ARTICLES