Epoxy Resin 200G + Hardener 120L
Item Number: 97001-120-V
The epoxy resin “Epox200G + Hardener 120L” is a system for hand laminating for vacuum infusion, fiber winding, and other processes.
For technological reasons, DNV-GL approval for the construction of boats and wind turbines will not be renewed.
However, the product will remain unchanged in our range.
Properties:
- Very low viscosity
- Free from alkylphenols and benzyl alcohol
- Crystallization-resistant – the resin component is based on bisphenol A/F and is therefore completely crystallization-resistant
- Solvent- and filler-free
- High static and dynamic strength
- Best results are achieved when the system/component is tempered for 1 hour at 23°C, followed by 5 hours at 70°C and 5 hours at 80°C
Application:
- Vacuum infusion (RI), •Vacuum pressing, •Wet pressing, RTM (resin transfer molding), •Fiber winding, •Hand laminating
Processing:
- Mixing ratio 100 parts / 30 parts (100 parts resin / 30 parts hardener) by weight!
- Pot life can be adjusted as desired by mixing the two hardener variants 15L and 120L. Further data can be found in the technical data sheet.
- Curing is possible from 15°C, but we recommend warm curing at 40°C for at least 12 hours.
- Processing time: approx. 120 min.
Technical Data Sheet
Processing Instructions
Safety Data Sheet
5
4
3
2
1
Loading reviews...
Delete review
Information on the Authenticity of Customer Reviews
Only registered customers can submit a review, and only after purchasing the product. All visible reviews meet this requirement.
Label Elements
Epoxy Resin 200G

Hardener 120L

Epoxy Resin 200G
Hazard statements
H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause allergic skin reactions. H411 Toxic to aquatic life with long-lasting effects. EUH205 Contains epoxy compounds. May cause allergic reactions.
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P273 Avoid release to the environment. P280 Wear protective gloves/eye protection/face protection. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Hardener 120L
Hazard statements
H314 Causes severe skin burns and eye damage. H317 May cause allergic skin reactions. H412 Harmful to aquatic life with long-lasting effects.
Precautionary statements
P260 Do not breathe dust or mist. P303+P361+P353 If on skin (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a poison control center or doctor. P321 Specific treatment (see this label). P362+P364 Take off contaminated clothing and wash before reuse. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
DD Composite GmbH
Daniel Dietrich
Zu den Bürgerhufen 6
04924 Bad Liebenwerda OT Lausitz
Germany
gpsr@phd-24.de
+493534147098





