PHD
Mold-making kit with epoxy resin
Item number 100021
EUR 95.80
*
Ready for shipping, delivery in 48h
Content
1 pack
Unit price
€95.80 / pack
* Incl. VAT excl. Shipping
With this starter kit, you can create a positive or negative mold from a master model.
For smaller molds up to 1 m² in total surface area.
- 1.5 kg Epoxy Resin 4307 + Hardener 1208-F
- 0.388 kg Epoxy Resin Gelcoat 4300 + Hardener 390
- 100g RAL 9005 black color paste
- 80g Formula Five release wax
- 100g yellow modeling wax (Filling Wax)
- 2m² 300g roving fabric - twill weave
- 1m² 163g glass filament fabric (Finish) - twill weave
- 100g 6mm glass fiber chippings
- 50g Microflocks
- 25g Thixotropic agent
- 5x Mixing cups 600ml
- 10x Wooden stirring sticks
- 2x Laminating brushes 30mm
- 2x Paint brushes 20mm
- 1x Long-groove de-airing roller 21x70mm
- 10x Protective gloves XL
Processing instructions:
- Clean the master model
- Apply release agent (see technical data sheet for release agent)
- Mix epoxy resin gelcoat with color paste and thixotropic agent, then apply 2 coats
- Mix glass fiber chips and microflocks with the epoxy resin and reinforce the edges
- Laminate epoxy resin with glass filament fabric
- Reinforce epoxy resin with several layers of roving fabric
- Demoldable after 24–48 hours
- Full cure in 7–10 days
Daniel Dietrich
Zu den Bürgerhufen 6
04924 Bad Liebenwerda
Germany
gpsr@phd-24.de
+493534147098
PHD
DD Composite GmbH
Zu den Bürgerhufen 6
04924 Bad Liebenwerda OT Lausitz
Germany
info@phd-24.de
https://www.phd-24.de/
03534147098
03534147099
