Repair Kit for Cars, Boats and Motorcycles Epoxy Resin
Item Number: 10004
The set includes:
- 500 g Epoxy Resin 4307 + 200 g Hardener 140-F
- 1 m² glass filament fabric 160 g/m² - twill weave,
- 2 x brushes (30 mm)
- 2 x mixing cups 600 ml
- 1 x mixing stick
- 10 nitrile gloves, size XL
Our epoxy resin “Epox4307/Hardener140-F” is an epoxy resin system for coatings, adhesives, and fillers; it is also excellent for impregnating glass, aramid, and carbon fibers.
- Excellent adhesion to wood, metal, concrete, Styrofoam, fiberglass, etc.
- Low viscosity
- Solvent- and filler-free
- Good impregnation properties
- Good chemical resistance
- Mixing ratio 100 parts / 40 parts (100 parts resin / 40 parts hardener) by weight!
- Processing temperature: 10°C and above
- Working time (at 20°C): approx. 15–20 min
- Curing time (at 20°C): approx. 3–4 hours
Our glass filament fabric is an easily moldable fabric designed to improve bonding with polyester and epoxy resins. “Finish” means that an adhesive has been applied to the fabric. Finished fabrics are easier to impregnate and more pliable than fabrics without a finish. They exhibit higher strength and better water and aging resistance. With a resin consumption of approx. 140 g/m², a laminate thickness of approx. 0.16 mm is achieved.
- Width: 1.0 m
- Weave: Twill
- Very drapeable
- High strength
- Folded
Technical Data Sheet
Processing Instructions
Safety Data Sheet
5
4
3
2
1
Loading reviews...
Delete review
Information on the Authenticity of Customer Reviews
Only registered customers can submit a review, and only after purchasing the product. All visible reviews meet this requirement.
Label Elements
PHD
Daniel Dietrich
Zu den Bürgerhufen 6
04924 Bad Liebenwerda
Germany
gpsr@phd-24.de
+493534147098
