Polyester resin DIEPAL S-20-V + Hardener
Item Number: D-19100-V
Our styrene-free DIEPAL S-20-V is a medium-viscosity, medium-reactive unsaturated polyester resin based on isophthalic acid and neopentyl glycol dissolved in vinyltoluene, which, after curing, produces products with good thermal and mechanical properties and is suitable for almost all common processing methods.
DIEPAL S-20-V is particularly well suited for the manufacture of molded parts that have to meet increased requirements in terms of chemical and thermal resistance.
Processing:
- DIEPAL S-20-V should be processed at room temperature (15–25 °C). Lower processing temperatures have a negative effect on curing.
- The polyester resin should be stirred thoroughly before use.
- Processing time approx. 25–35 min. (room temperature 23°C) with 2% MEKP hardener DD-MP1.
- Do not process at resin and room temperatures below 18°C.
- Shelf life at 20°C: 3 months.
- Color: light brown.
- Cures sticky.
Technical Data Sheet
Processing Instructions
Safety Data Sheet
5
4
3
2
1
Loading reviews...
Delete review
Information on the Authenticity of Customer Reviews
Only registered customers can submit a review, and only after purchasing the product. All visible reviews meet this requirement.
Label Elements
DIEPAL S-20-V

MEKP-Hardener

DIEPAL S-20-V
Hazard statements
H226 Flammable liquid and vapor. H315 Causes skin irritation. H317 May cause allergic skin reactions. H400 Very toxic to aquatic life. H411 Toxic to aquatic life with long-lasting effects.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P370+P378 In case of fire: Use foam to extinguish. P501 Dispose of contents/container to an appropriate recycling or disposal facility. P240 - Ground container and equipment to be filled. P241 - Use explosion-proof electrical equipment. P242 - Use low-spark tools. P243 - Take measures against electrostatic discharge. P302+P352 - IF ON SKIN: Wash with plenty of soap and water. P362+P364 - Take off contaminated clothing and wash before reuse.
MEKP-Hardener
Hazard statements
H242 Heating may cause a fire. H302+H332 Harmful if swallowed or if inhaled. H314 Causes severe skin burns and eye damage.
Precautionary statements
P2l0 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P234 Store only in original container. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water. P305+P351+P338+P3l0 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. P370+P378 In case of fire: Use water spray, alcohol-resistant foam, dry powder, or carbon dioxide to extinguish.
DD Composite GmbH
Daniel Dietrich
Zu den Bürgerhufen 6
04924 Bad Liebenwerda OT Lausitz
Germany
gpsr@phd-24.de
+493534147098





