3kg GRP Epoxy Resin + 4m² Glass Filament Fabric Silane 390g/m² twill weave
* Incl. VAT excl. Shipping
3 kg Epoxy Resin Kit + 4 m² Glass Filament Fabric Silane 390 g/m² Twill 40 min
This is top quality from a brand-name manufacturer!
Our kit consists of a high-quality resin and an easily moldable fabric, which is suitable for laminating lightweight components such as models.
- Working time: 40 min
- Laminate thickness: 0.45 mm
Epoxy resin
2x 1 kg Epox 4307 + 2x 500 g Hardener 1208-F
Our epoxy resin “Epox4307/Hardener1208-F” is a universal system for coatings, adhesives, and fillers; it is also excellent for impregnating glass, aramid, and carbon fibers.
- Excellent adhesion to wood, metal, concrete, styrofoam, fiberglass, etc.
- Low viscosity
- Solvent- and filler-free
- Good impregnation properties
- Good chemical resistance
Application:
- Mixing ratio 100 parts / 50 parts (100 parts resin / 50 parts hardener)
- Mix by weight!
- Application temperature from 10°C
- Working time (at 20°C) approx. 40–45 min
- Curing time (at 20°C) approx. 24–36 hours
+
4 m² glass filament Silane 390 g/m²
Our glass filament fabric is a highly moldable fabric suitable for laminating lightweight components such as models.
- Weave: Twill
- The diagonal lines are unmistakable
- Very drapeable
- Better for curves and complex shapes
- Lower shear strength than plain weave
- With a resin consumption of approx. 310 g/m², a laminate thickness of approx. 0.43 mm is achieved
Width: 1.0 m, Length: 4.00 m = 4 m² (folded); if you would like it on a roll, please inquire—available for an additional charge
