Vacuum Sealing Tape, Gray, 12 mm, 21 running meters
Item Number: 25033
| Minimum quantity: 5 | €10.40 | €0.50 / meter |
| €0.50 / meter | ||
| Minimum quantity: 10 | €9.40 | €0.45 / meter |
| €0.45 / meter | ||
| Minimum quantity: 30 | €8.33 | €0.40 / meter |
| €0.40 / meter | ||
| Minimum quantity: 120 | €8.09 | €0.39 / meter |
| €0.39 / meter |
A sealing tape designed for vacuum infusion. With excellent initial tack, it achieves an airtight seal during the curing cycle. It offers easy demolding and minimal to no cleaning between production cycles.
The tape has an optimal curing temperature range from room temperature to 90°C, with peak values up to 130°/140°C.
- Color: Gray
- Dimensions: 12 mm x 2 mm x 21 m
- For bonding and sealing vacuum film and molds
- Easy to apply
- Very good initial tack
- Consistent adhesion during low-temperature cycles
- Peels off cleanly, leaving virtually no residue
- Good adhesion to various surfaces
- The surface should be clean, dry, and free of dust
Place the strip onto the surface, avoiding air bubbles, with the release paper on top; then remove the release paper when applying the film.
It is recommended to apply the strips at temperatures below 60°C to prevent warping of the parts
Note: For clean removal, it is recommended to wait until the sealing tape has cooled to room temperature before peeling it off the mold.
Technical Data Sheet
5
4
3
2
1
Loading reviews...
Delete review
Information on the Authenticity of Customer Reviews
Only registered customers can submit a review, and only after purchasing the product. All visible reviews meet this requirement.
PHD
Daniel Dietrich
Zu den Bürgerhufen 6
04924 Bad Liebenwerda
Germany
gpsr@phd-24.de
+493534147098
