Hardener 120L
Item Number: 99120L-V
Hardener 120L for our epoxy resin 200G (single component)
For technological reasons, DNV-GL approval for the construction of boats and wind turbines will not be renewed.
However, the product will remain unchanged in our range.
- The resin component is based on bisphenol A/F and is therefore completely crystallization-free.
- Very low viscosity (250 mPas at 25°C)
- High transparency -> color number < 1 according to Gardner
- Glass transition temperature (Tg) > 85 °C (when cured at elevated temperatures)
- Solvent- and filler-free
- Very good impregnation properties for glass fabric, aramid fabric, and carbon fabric (carbon fibers)
- Very good chemical resistance
Processing:
- Mixing ratio 100:30 (100 parts resin / 30 parts hardener) by weight
- Mixing ratio 100:35 (100 parts resin / 35 parts hardener) by volume
- Processing temperature from 15°C
- Pot life (at 23°C -> 40°C) approx. 109 minutes (according to internal measurement method)
- Processing time approx. 150 min
- We recommend tempering the system/component for 1 hour at 23°C, followed by 5 hours at 70°C and 5 hours at 80°C (heat curing) to achieve the best possible properties
- Suitable for: Hand laminating, vacuum infusion (RI), RTM (resin transfer molding), fiber winding, wet pressing, vacuum pressing
Technical Data Sheet
Processing Instructions
Safety Data Sheet
5
4
3
2
1
Loading reviews...
Delete review
Information on the Authenticity of Customer Reviews
Only registered customers can submit a review, and only after purchasing the product. All visible reviews meet this requirement.
Label Elements

Hazard statements
H314 Causes severe skin burns and eye damage. H317 May cause allergic skin reactions. H412 Harmful to aquatic life with long-lasting effects.
Precautionary statements
P260 Do not breathe dust or mist. P303+P361+P353 If on skin (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a poison control center or doctor. P321 Specific treatment (see this label). P362+P364 Take off contaminated clothing and wash before reuse. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
DD Composite GmbH
Daniel Dietrich
Zu den Bürgerhufen 6
04924 Bad Liebenwerda OT Lausitz
Germany
gpsr@phd-24.de
+493534147098





