Nitro-Kombi-filler 1K Fine filler, quick-drying
Item Number: 50100N-V
| Minimum quantity: 30 | €5.65 | €565.25 / kilogram |
| €565.25 / kilogram |
Fast-drying 1K fine filler based on nitrocellulose synthetic resin
- Well suited as a spot filler for removing small areas of damage, such as scratches or stone chips, and for smoothing minor unevenness.
- Excellent adhesion to a wide variety of substrates, especially sheet steel, wood, and polyester-based car body parts.
Application:
- Processing temperature: The ambient and material temperature should be between +18 °C and +25 °C during processing.
- Do not use below +5 °C!
Instructions for use:
The surfaces to be filled must be free of grease and rust and slightly roughened. Applied in thin layers, the filler can be sanded after approx. 30 minutes drying time. For thicker layers, several thin layers can be applied. Allow a drying time of approx. 1 hour between applying the individual layers. For better corrosion protection, bare metal should be primed before applying the filler.
5
4
3
2
1
Loading reviews...
Delete review
Information on the Authenticity of Customer Reviews
Only registered customers can submit a review, and only after purchasing the product. All visible reviews meet this requirement.
Label Elements
Hazard statements
H226 Flammable liquid and vapor. H336 May cause drowsiness or dizziness.
Precautionary statements
P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P271 Use only outdoors or in well-ventilated areas. P280 Wear protective clothing. P370+P378 In case of fire: use alcohol-resistant foam to extinguish. P403+P235 Store in a well-ventilated place. Keep cool.
Airo
Peter Famula
Carl-Leverkus-Straße 27
40764 Langenfeld
Germany
info@airo-chemie.com
+49217385380
